Binsky & Snyder, LLC

1000-32 Chestnut St

Addition and/or Alterations · FOR THE INSTALLATION OF REGISTERS, DIFFUSERS, AND EXHUST FANS WITH ASSOCIATED DUCTWORK TO BE INSTALLED IN ACCORDANCE WITH THE MANUFACTURER’S SPECIFICATIONS. FOR USE AS PREVIOUSLY APPROVED. ALL WORK TO BE DONE PER APPROVED PLANS. IF FIELD CONDITIONS VARY CONTACT DESIGN ENGINEER PRIOR TO THE START OF ANY WORK. SEPARATE PERMITS TO BE OBTAINED FOR ALL OTHER WORK.

200 S Broad St

Alterations · Furnish and install steam to hot water heaters. Furnish and install sump pump, hot water recirc. pump, all fixtures shown and scheduled on drawings including water closets, lavatories, showers, sinks, urinals, electric water cooler, mop receptor, floor and trench drains and grease interceptor. Furnish and install backflow prevention devices and pressure-reducing valves, as required. Furnish and install all plumbing piping, including domestic water, sanitary waste, sanitary vents, and indirect

200 S Broad St

Addition and/or Alterations · FOR THE INSTALLATION OF REGISTERS, DIFFUSERS, HYDRONIC PIPING AND APPLIANCES WITH ASSOCIATED DUCTWORK. APPLIANCES TO BE INSTALLED IN ACCORDANCE WITH THE MANUFACTURER’S SPECIFICATIONS. ALL WORK TO BE DONE PER APPROVED PLANS. IF FIELD CONDITIONS VARY CONTACT DESIGN ENGINEER PRIOR TO THE START OF ANY WORK. SEPARATE PERMITS REQUIRED FOR ALL OTHER WORK.

200 S Broad St

Addition and/or Alterations · FOR THE INSTALLATION OF APPLIANCES WITH ASSOCIATED DUCTWORK. APPLIANCES TO BE INSTALLED IN ACCORDANCE WITH MANUFACTURER'S SPECIFICATIONS. ALL WORK TO BE DONE PER APPROVED PLANS. IF FIELD CONDITIONS VARY CONTACT DESIGN ENGINEER PRIOR TO THE START OF ANY WORK. SEPARATE PERMITS REQUIRED FOR ALL OTHER WORK. *NO REGISTERS, DIFFUSERS ON THIS PERMIT.